Fix Error Code 20 - Myths and Truths
Error Code, Windows Error Code, Error Code Fix - ErrorCodeFixHome Download Help/Support Guide Order Now

Fix Error Code 20 - Myths and Truths

Possible Errors

"Printer not activated – Error code 20"

error code 20 error

You might have received error messages like the above when you try to use your printer. It must be annoying when your printer refuses to work when you need it, especially in an emergency. When this happens, you have to check the performance of your printer, and also check if you have further damaged in your computer.

We strongly suggest that you run a quick scan for error code 20 for your PC to check and fix the errors.

The Truths of Error Code 20

Error code 20 often shows up when you are using your printer. You get the error message in the middle of a printing process because the printer is not set as the default printer in your system, or the driver of the printer is missing or has encountered a problem. It could also due to a conflict between the printer you are using and some other devices installed in your computer.

How to Fix Error Code 20?

In the previous parts, we have learned the causes and consequences of the error code 20. Now before getting to the solutions, the primary things you have to do is to check the present status of the printer you are using.

First, you have to check if the printer you are using now has set as default. To do this, follow the steps below:

  1. Click on Start > Control Panel > Printer and Faxes
  2. Go to the Printers Folder
  3. Check for the presence of the printer icon
  4. See if the printer has a check mark beside it
  5. If not, right click on the printer icon
  6. Select Print Test Page. If the page is printed successfully, the printer has set as default

If the problem is still there, you can try re-installing the USB Composite Device

  1. Right click on My Computer
  2. Click on Properties > Hardware tab > Device Manager
  3. Double click on Universal Serial Bus controllers
  4. Right click on USB Composite Device > Uninstall > click OK
  5. Remove the USB cable and reconnect it to your computer
  6. Then click on "Found New Hardware Wizard" and follow the steps
  7. When the process is complete, go to Start > Printer and Faxes > Printers
  8. Try printing the test page as the previous steps

In other cases, you can also try to uninstall and reinstall the driver of your current printer to see if it can solve your problem.

To ensure the security and efficiency of your PC, get our ErrorCodeFix to fix error code 20 error in minutes!


by Gerry D, US

"This program works well for me. It is so fast and so easy to use. Thanks for everything you've done, and the customer support has been very helpful too!"


SOFTPEDIA "100% CLEAN" AWARD in ErrorCodeFix

Error Code Error Fix Guides